MCH6103 / mch6203 no.6611-1/5 applications ? relay drivers, lamp drivers, motor drivers, flash. features ? adoption of mbit processes. ? high current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm). ? high allowable power dissipation. specifications ( ) : MCH6103 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--50)80 v collector-to-emitter voltage v ces (--50)80 v v ceo (--)50 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)1.0 a collector current (pulse) i cp (--)3 a base current i b 200 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 1.0 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)40v, i e =0 (--)0.1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0 (--)0.1 m a dc current gain h fe v ce =(--)2v, i c =(--)100ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)300ma 420 mhz output capacitance cob v cb =(--)10v, f=1mhz (9)6 pf marking : MCH6103 : ac, mch6203 : cc continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6611a d1004 ts im tb-00000351 / n2000ts (koto) ta-2974 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. MCH6103 / mch6203 pnp / npn epitaxial planar silicon transistors dc / dc converter applications
MCH6103 / mch6203 no.6611-2/5 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-emitter saturation voltage v ce (sat)1 i c =(--)500ma, i b =(--)10ma (--280)130 (--430)190 mv v ce (sat)2 i c =(--)300ma, i b =(--)6ma (--145)90 (--220)135 mv base-to-emitter saturation voltage v be (sat) i c =(--)500ma, i b =(--)10ma (--)0.81 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0 (--50)80 v collector-to-emitter breakdown voltage v (br)ces i c =(--)100 m a, r be =0 (--50)80 v v (br)ceo i c =(--)1ma, r be = (--)50 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0 (--)5 v turn-on time t on see specified test circuit. (36)38 ns storage time t stg see specified test circuit. (173)332 ns fall time t f see specified test circuit. (28)40 ns package dimensions switching time test circuit unit : mm 2177a 1 : collector 2 : collector 3 : base 4 : emitter 5 : collector 6 : collector sanyo : mcph6 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 1 123 654 32 5 46 (bottom view) (top view) v r r b v cc =25v v be = --5v + + 50 w input output r l 50 w 100 m f 470 m f pw=20 m s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =500ma for pnp, the polarity is reversed. --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --200 --400 --600 --800 --1000 i c -- v ce --2ma --1ma --4ma --6ma --8ma --10ma --30ma --20ma --40ma i b =0 MCH6103 it01890 0.4 0.6 0.8 1.0 0.2 0 0 200 400 600 800 1000 i c -- v ce 1ma 2ma 4ma 6ma 8ma 10ma 20ma 30ma 40ma i b =0 it01891 mch6203 collector-to-emitter voltage, v ce -- mv collector current, i c -- a collector-to-emitter voltage, v ce -- mv collector current, i c -- a
MCH6103 / mch6203 no.6611-3/5 v ce (sat) -- i c it01899 ta=75 c 25 c --25 c mch6203 i c / i b =50 1000 100 2 3 5 7 2 3 5 7 10 0.01 0.1 23 57 23 57 1.0 0.01 0.1 23 57 23 57 1.0 v ce (sat) -- i c it01897 ta=75 c 25 c --25 c mch6203 i c / i b =20 --1000 --100 2 3 5 7 2 3 5 7 --10 --0.01 --0.1 23 57 23 57 --1.0 --0.01 --0.1 23 57 23 57 --1.0 v ce (sat) -- i c it01896 ta=75 c 25 c --25 c MCH6103 i c / i b =20 --1000 --100 2 3 5 7 2 3 5 7 --10000 2 3 5 7 --10 1000 100 2 3 5 7 2 3 5 7 10000 2 3 5 7 10 v ce (sat) -- i c it01898 ta=75 c 25 c --25 c MCH6103 i c / i b =50 1000 100 7 5 3 2 7 5 3 2 10 --0.01 3 25 --0.1 73 257 --1.0 h fe -- i c it01894 ta=75 c 25 c --25 c MCH6103 v ce = --2v 1000 100 7 5 3 2 7 5 3 2 10 0.01 3 25 0.1 73 257 1.0 h fe -- i c it01895 ta=75 c --25 c mch6203 v ce =2v 25 c --0.7 --0.8 --0.9 --1.0 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 i c -- v be it01892 ta=75 c 25 c --25 c MCH6103 v ce = --2v 0.7 0.8 0.9 1.0 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1.0 ta=75 c 25 c --25 c mch6203 v ce =2v i c -- v be it01893 collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a base-to-emitter voltage, v be -- v dc current gain, h fe collector current, i c -- a dc current gain, h fe collector current, i c -- a collector current, i c -- a collector current, i c -- a collector current, i c -- a collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-emitter saturation voltage, v ce (sat) -- mv
MCH6103 / mch6203 no.6611-4/5 a s o i cp =3a i c =1a dc operation 100ms 10ms 1ms 500 m s 100 m s 0 1.4 1.0 0.8 0.6 0.4 0.2 1.2 20 060 40 80 100 140 120 160 p c -- ta MCH6103 / mch6203 it01907 1.0 0.1 7 5 5 3 3 2 2 7 5 3 2 0.01 1.0 0.1 25 37 10 25 37 100 25 37 it01906 f t -- i c 7 3 100 2 5 1000 it01905 mch6203 v ce =10v f t -- i c 100 1000 7 3 2 5 --0.01 257 3257 3 --0.1 --1.0 0.01 0.1 257 3257 3 1.0 it01904 MCH6103 v ce = --10v cob -- v cb 7 5 3 2 7 5 3 2 5 3 2 10 100 --1.0 23 57 23 5 23 5 7 --0.1 --10 it01902 MCH6103 f=1mhz 7 5 3 2 7 5 3 2 10 100 5 3 2 0.1 1.0 23 57 23 57 10 23 5 it01903 mch6203 f=1mhz cob -- v cb MCH6103 / mch6203 v be (sat) -- i c 10000 1000 100 ta= --25 c 25 c 75 c 7 5 3 2 7 5 3 2 it01901 0.01 0.1 23 57 23 57 1.0 --0.01 --0.1 23 57 23 57 --1.0 v be (sat) -- i c --10000 --1000 --100 ta= --25 c 25 c 75 c 7 5 3 2 7 5 3 2 it01900 mch6203 i c / i b =50 MCH6103 i c / i b =50 collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- a ambient temperature, ta -- c collector dissipation, p c -- w ta=25 c single pulse for pnp, minus sign is omitted. mounted on a ceramic board (600mm 2 5 0.8mm) mounted on a ceramic board (600mm 2 5 0.8mm) collector current, i c -- a collector current, i c -- a gain-bandwidth product, f t -- mhz gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv base-to-emitter saturation voltage, v be (sat) -- mv
MCH6103 / mch6203 no.6611-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2004. specifications and information herein are subject to change without notice. ps
|
